2003 Technical Session, National Tire Wholesale
November 20, 2003
Our 2003 Technical Session was held at National Tire Wholesale, in Vancouver. Thanks to Eathan Skwira for spending his evening showing us the details of front end wheel alignment.
A complete report will follow, but for now you can have a look at a few links, pictures.
The alignment instrument that they use is made by Hunter Engineering Company and has a display looking something like this.
Photos
Here are a few sample photos. They are each about 50 kB.
Looking down under the intake manifold where the control arm adjustments are located.
Fine tuning the toe adjustment.
Adjustments on driver's side.
Here you can just see the control arm pivot.
As above.
Adjusting the centre link.
Adjusting the centre link.
Lock nuts.
